The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
On September 3, 2010, the Emgrand EC7 CVT model was first launched in the East China region (Jiangsu, Zhejiang, and Shanghai). There are a total of 8 1.8L displacement models, including the Emgrand EC718 (three door) and Emgrand EC-RV (two door), with prices ranging from 92800 to 109800 yuan; The four models of the Emgrand EC7-RV CVT are priced at 89800 to 105800 yuan
Copyright © 2021.Company name All rights reserved.