Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Dongfeng Xiaokang C37 introduce

Appearance: The Dongfeng Xiaokang C37 has a sharp and angular exterior design. When you first see it, you will always feel a bit like the new generation Quanshun. The square and square shape adds a stronger business atmosphere to it. Basic parameters: The exterior dimensions are 4500 * 1680 * 1960mm, with a wheelbase of 3050mm. Compared with other competing models, the Dongfeng Xiaokang C37 should be considered a big block in micro passenger products. The vertically placed headlight assembly looks very personalized, The appearance of the Fangzheng is consistent with the overall style of the vehicle. The large intake grille adopts two thick horizontal bar designs, giving a domineering and tough feeling. Interior: The center console is wrapped in hard plastic, and according to the editing experience, the seams between various components are even without any burrs or other phenomena. The center console adopts a color combination of deep top and light bottom, which meets the aesthetic requirements of Chinese people. Space: The interior space of the Dongfeng Xiaokang C37 is still very good, Even for the 9-seat model with the largest number of seats, the interior space will not feel particularly cramped, and the middle two rows of seats can also be adjusted back and forth, which is more practical. Power: Dongfeng Xiaokang C37 is equipped with a 1.4L all aluminum engine, model DK13-06, the maximum power is 101 horsepower/6000 rpm, the maximum torque is 124N · m/5200 rpm, and the transmission is a 5-gear manual transmission. This engine uses a variable valve timing system, Fully meet the intake requirements of the engine at different speeds. In terms of configuration, the Dongfeng Xiaokang C37 comes standard with 185R14LT wide tires, aluminum alloy wheels, power steering, front electric windows, and child safety locks. In addition, the high-end models of Dongfeng Xiaokang are also equipped with leather seats and visual radar, and can also be equipped with ABS and driver's safety airbags