• Website for purchasing dismantled parts
  • 8:00-18:00
Dongfeng Xiaokang C37 Front and rear door hinges

Dongfeng Xiaokang C37 Front and rear door hinges

  • Price:please consult customer service
  • Transportation costs:Negotiate with sales personnel

number:

Front and rear door hinges introduce

Also known as door hinge, it is used for opening and closing doors. Hinges, also known as hinges, are mechanical devices used to connect two solids and allow relative rotation between them. Hinges can be composed of movable components or foldable materials. The main feature is to provide cushioning when the cabinet or door is closed, minimizing the noise generated by collisions with other parts when the door is closed. Car hinges are generally used in car doors and engine hood, And the trunk lid, fuel tank lid hinge, etc. In order to connect the car door to the body, the hinge is responsible for connecting the car door to the body, ensuring the opening and closing of the car door, and allowing the car door to open and close, so there is a door hinge. Its main function is to connect the car body to the car door. Generally, The door hinge should consist of at least three parts. 1. Body parts connected to the vehicle body. 2. Door parts connected to the door. 3. Other parts that connect the body parts and door parts and ensure that the door hinge can make opening and closing movements)

The installation of car doors requires the following processes:

The installation of car doors requires the following steps: 1. First, prepare the new car door that needs to be replaced and installed. Place the new car door on a paper shell to avoid scratching the new door, and prepare the necessary tools for installation, including a large wheel, a small wheel, a No. 13 sleeve, a No. 6 sleeve, and a small hammer. Then, start the operation process. 2. Install the door hinges, where a large wheel is required, Cooperate with sleeve 13. Take out the door hinge, fix the screws of the door hinge, and then make a rough comparison by hand to check whether the hole of the hinge is the same size as the screw hole of the door, and whether the screw can be screwed in exactly. Do a good job of inspection. 3. After comparing the hinge by hand, take out the large wheel and match it with sleeve 13. Gently tighten the screws that fix the hinge to the door by hand, and then use tools to tighten it. If you use tools to tighten it directly, It is easy to break the screws, which results in the entire car door being scrapped. Therefore, when tightening, be careful and slow. Pay attention to the extended part of the hinge head facing downwards, as it needs to be inserted into the card slot of the car body hinge. 4. Lift the door with the installed hinge by hand and lift it to the installation position of the car body door. There are two hinge holes on the installation position of the car body door, and the extended part of the hinge head on the new car door should be aligned up and down, Insert it into the two hinge holes on the car body. Be sure to take it slow and align the upper and lower holes before inserting it to avoid scratching the paint surface on the car body. 5. The extended part of the inserted hinge may get stuck halfway through the holes, which is a common problem, but it is also easy to solve. Take out the hammer and smash the hinge on the car door twice with the hammer, and the extended part will enter the car body hole. 6. Next, remove the screw that fixes the car body hinge, There is a screw hole in the middle part of the body hinge hole, which is used to fix the body hinge and door hinge. First, gently screw in a part by hand to avoid damaging the screw directly with tools. The screw on the door should be fixed with extra care. 7. Take out the small wheel, long extension rod, and No. 6 sleeve, and tighten the screw that has been screwed in by hand with tools. There are a total of two screws, up and down, which are also completed according to the above procedure. It should be noted that:, Be sure to steadily and tentatively tighten the screws bit by bit in order to complete the task smoothly

Dongfeng Xiaokang C37 introduce

Appearance: The Dongfeng Xiaokang C37 has a sharp and angular exterior design. When you first see it, you will always feel a bit like the new generation Quanshun. The square and square shape adds a stronger business atmosphere to it. Basic parameters: The exterior dimensions are 4500 * 1680 * 1960mm, with a wheelbase of 3050mm. Compared with other competing models, the Dongfeng Xiaokang C37 should be considered a big block in micro passenger products. The vertically placed headlight assembly looks very personalized, The appearance of the Fangzheng is consistent with the overall style of the vehicle. The large intake grille adopts two thick horizontal bar designs, giving a domineering and tough feeling. Interior: The center console is wrapped in hard plastic, and according to the editing experience, the seams between various components are even without any burrs or other phenomena. The center console adopts a color combination of deep top and light bottom, which meets the aesthetic requirements of Chinese people. Space: The interior space of the Dongfeng Xiaokang C37 is still very good, Even for the 9-seat model with the largest number of seats, the interior space will not feel particularly cramped, and the middle two rows of seats can also be adjusted back and forth, which is more practical. Power: Dongfeng Xiaokang C37 is equipped with a 1.4L all aluminum engine, model DK13-06, the maximum power is 101 horsepower/6000 rpm, the maximum torque is 124N · m/5200 rpm, and the transmission is a 5-gear manual transmission. This engine uses a variable valve timing system, Fully meet the intake requirements of the engine at different speeds. In terms of configuration, the Dongfeng Xiaokang C37 comes standard with 185R14LT wide tires, aluminum alloy wheels, power steering, front electric windows, and child safety locks. In addition, the high-end models of Dongfeng Xiaokang are also equipped with leather seats and visual radar, and can also be equipped with ABS and driver's safety airbags

Customer Reviews

  • 1.We will vary based on your shipping address and the chosen delivery method, and the general delivery time is 1-7 days
  • 2.All products sold and shipped from our company are genuine commercial accessories
  • 3.Each order comes with a Chinese printed "outbound list", which can be used as a unit accounting voucher and will be shipped together with the package
  • 4.If replacement is required, please keep the accessories clean and intact in packaging, along with the delivery note, and send them back. Our company promises to guarantee return and exchange within 15 days
  • 5.Special note: ordering accessories from the manufacturer is not covered by the warranty

Other Parts