The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Committed to creating the highest cost-effective Dongfeng Xiaokang K01, it has an unparalleled advantage in the industry in terms of high cost-effectiveness. It has a body size of 3640mm in length, 1560mm in width, and 1925mm in height. Compared with similar models, it has many advantages such as large space, strong road passing performance, and sedan style side door opening. It is a highly anticipated and practical product for consumers, A highly competitive product in the industry. The center console design of Dongfeng Xiaokang K01 adopts K07's "molded" design, with a slight simplification in color matching and materials. It is made of two hard plastics, beige and black. Its appearance is simple and simple, and it is commonly seen in the market
Copyright © 2021.Company name All rights reserved.