ABS pump introduce

ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)

ABS pump installation and disassembly method

1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket

Dongfeng Xiaokang K07 II introduce

The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models