Headlamp assembly introduce

Installed on both sides of the car's head, it is used for lighting on nighttime driving roads. There are two lamp systems and four lamp systems. As the lighting effect of the front headlights directly affects the operation and traffic safety of nighttime driving, traffic management departments around the world have established their lighting standards in legal format. Headlight assembly: installed at both ends of the car's head, it is used for lighting when the car is driving at night or on dimly lit roads, There are two forms: a dual headlight system (dual headlights) that combines single high beam and low beam, and a four headlight system (four headlights) that separates single high beam and low beam The headlight assembly also includes a side marker light, which is used for driving at night in the evening to inform other drivers of their position and play a safety role in driving at night. The headlight is installed in the middle of the headlight assembly. Generally, a car's headlight is a light bulb with low and high beam filaments inside, As long as you control the proximity and distance of the light switch wiring harness, many car headlight assemblies are equipped with automatic light controllers. The beam can be automatically adjusted during passing, ensuring no interference and improving driving safety. Depending on the vehicle model, there are multiple methods for designing the light bulb: 1. If the original car is a xenon headlight assembly, replace the assembly directly. If it is a pure xenon bulb type, the assembly can be omitted. 2. For added ones, There are also assembly style (modified) ones; There are also separate xenon bulbs that are separate from the main components of the headlights. 3. There are separate bulbs, such as those that separate the high and low beams. In addition to the above methods, they can be replaced separately. Except for the simple replacement of the original assembly parts, for general individual replacement bulbs (xenon bulbs), it is important to note that the relevant power is equivalent. If it is too large, the corresponding current increases and the heat increases, causing the lamp to age too quickly. The lamp head may also be "melted", At the same time, it brings an additional power burden to the car's generator and battery. Specific operation: Replace halogen bulbs with xenon bulbs: There are xenon bulbs on the market that are compatible with various halogen bulbs, such as H4. H7. H1. H3. HB3. HB4. Headlamps that were originally halogen bulbs can be achieved by replacing them with separate xenon bulbs, But such modifications need to pay attention to line safety and related sealing. Precautions: Qualified products must be selected before replacement, and compliance with road traffic regulations is a prerequisite)

The installation method for replacing the headlight assembly is:

The replacement method for the headlight assembly is as follows: 1. Open the engine compartment cover and observe the layout of the components on the back of the front headlights; 2. Unscrew the car lamp cover; 3. Pull off the lamp holder with the power cord with force; 4. Release the lamp holder to remove the car headlight, and then reinstall the new bulb. The car headlight can be replaced by hand, but it is best to take protective measures to prevent touching the bulb and affecting the lifespan of the car headlight. It is not recommended to replace the car headlight by yourself, as improper installation can easily cause the headlight to fall off. Some vehicles require changing the vehicle's wiring and need to go to a professional repair shop for modification

Dongfeng Xiaokang K07 II introduce

The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models