The function of a car combination light is generally to provide illumination at night. The car light switch is made into a complete light control handle and installed under the steering wheel Car taillights include lighting fixtures, light bulbs, turn signals, and brake lights. Among them, a car has a pair of symmetrical left and right turn signals and brake lights)
1. Position light: Turn the light handle to the position light position, and all position lights, license plate lights, indoor background lights, and ambient lights will be turned on. Turn the handle to the OFF position, and all the above lights will be turned off. This position can let people know the position and width of the car clearly at night or in dim environments. 2. Low beam lights: Turn the light handle to the low beam position, and the low beam lights will be on. 3. Switching between high and low beams: When the low beam lights are on, Push the light switch handle in the direction of C (away from the steering wheel) to the limit position, and the high beam lights will be turned on; Turn the light switch handle back towards F (near the steering wheel) to switch back to low beam. 4. Overtaking lights: Turn the light switch handle towards F (near the steering wheel) to the extreme position, and the high beam lights will turn on. After releasing the handle, the high beam lights will automatically turn off
The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models
Copyright © 2021.Company name All rights reserved.