Combination instrument assembly introduce

The instrument panel is the interactive interface between humans and cars, providing drivers with the necessary car operating parameters, faults, mileage and other information. It is an essential component of every car. The intuitive and beautiful display of the instrument panel makes driving not only necessary for commuting, but also a part of comfortable life. The accuracy and reliability of parameter transmission are directly related to the safety of car driving [1] The most prominent feature of modern instruments is the modularization of functions. Usually, a single instrument needs to be assembled, and only a few functional modules need to be combined on the basis of customized PCBs to obtain a complete system. The pointer instruments of economic vehicles such as Chang'an are generally independent modules, and the indication/alarm function is completed by small light bulbs on the PCB. The SANTANA series pointer is driven by cross coils on the printed circuit board, The prompt/alarm lights are all the main data displayed on the dashboard of light-emitting diode cars. The source and corresponding display methods. Integrated circuit technology is rapidly developing, and the density and volume of integrated circuits are getting higher and smaller. The internal structure is becoming more complex and the functions are becoming more powerful. As some functions of the instrument panel are constantly replaced by software, hardware is becoming more and more powerful, The integration level of the entire system is also correspondingly improving. This design is based on Freescale microcontrollers and is aimed at traditional cars that dominate the market. It cites Changan's instrument panel as a template, with the main purpose of achieving a low-end solution for automotive electronic instrument panels)

Attention should be paid to the disassembly and assembly of automotive instruments:

Attention should be paid to the disassembly and assembly of automotive instruments: 1. When replacing the meter core or sensor separately, the instrument and sensor must be used together. 2. When disassembling the instrument and sensor, the action should be light and not knocked. 3. The wiring terminals of electromagnetic instruments have polarity and must not be connected incorrectly. The instruments on different car dashboard are not the same, but the conventional instruments in general cars include speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging meter, etc. In modern cars, The automotive instrument panel also needs to be equipped with a voltage regulator, specifically for

Dongfeng Xiaokang K07 II introduce

The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models