The car engine computer is the core part of electronic controlled cars nowadays, and its functions can be simply put as two: 1. receiving signals from various sensors and calculating corresponding data; 2. Control the fuel injection, ignition, and idle intake of the car engine based on the calculated data to ensure the normal operation of the engine and minimize engine emission pollution. 3. If the engine computer board is damaged, the following situations may occur: 1. The engine malfunction light is on, but then catches fire and the vehicle shakes; 2. The car is difficult to start, with no ignition or fuel injection, and internal program disorder. There are many symptoms of the engine computer board being broken, with minor ones being the engine malfunction light coming on and then catching fire. The vehicle shakes, making it difficult to start. In severe cases, the vehicle may be unable to start, with no ignition or fuel injection, and internal program disorder)
1. Use a T20 screwdriver to disassemble the screen and a 10mm hexagonal socket to disassemble the brake light. 2. Use a plastic pry bar to disassemble the panel, pry the pry bar firmly to loosen it, and unscrew the four screws of the host using t20. 3. Use t20 to unscrew the four screws around the host and pull them out, connecting three wires to the back. 4. Use a 10mm socket to disassemble three reversing lights, and the power of the rear camera is also connected to the black negative wire and the white green positive wire of this light
The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models
Copyright © 2021.Company name All rights reserved.