The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Dongfeng Xiaokang K17 has a large space, strong load-bearing capacity, sufficient power, large body space, and strong loading capacity. It has two displacements of 1.1L and 1.3L, with a maximum torque of 83nm for the 1.1L engine and 102nm for the 1.3L engine. It is matched with a 5-speed manual transmission, and the power is decent. The front and rear drums are equipped with a braking system, equipped with ABS. The Xiaokang K17 has a very high cost performance ratio
Copyright © 2021.Company name All rights reserved.