tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Dongfeng Xiaokang V07s introduce

Dongfeng Xiaokang V07s is a car in the Dongfeng Xiaokang series. The Dongfeng Xiaokang V07s adopts a sedan style double opening middle door design, with a maximum opening angle of 90 °, making it more convenient for passengers to get on and off; Widen the spacing between seats, provide more legroom, and allow for more comfortable extension; The middle and rear seats can be freely disassembled and installed, with flexible space for use and the ability to melt larger loads, showcasing unlimited use and creating unlimited value