crossmember introduce

Yuanbaoliang, the concept of "subframe", is a new term often used in car books. This component is not only found in Volkswagen cars, but also in other car models. The subframe is not a complete frame, but only a bracket that supports the front and rear axles and suspension, connecting the axles and suspension to the "main frame" through it, commonly known as the "subframe". The function of the subframe is to block vibration and noise, reduce their direct entry into the car compartment, so it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes for engines)

Yuanbaoliang/subframe installation

1: Two horns of the gearbox: 2. Return oil pipe and oil pipe of the steering gear. 3. Half shaft and balance rod. Direction rod. 4. Connection of the steering intermediate shaft to the steering gear. 5. Installation of four fixing screws for the Yuanbao beam. 1. Fixation of four screws and intermediate shaft. 2. Two oil pipes. 3. Horn, half shafts and pull rods on both sides

Celica introduce

Wheelbase (front and rear) (mm) 1490/1480 Engine parameters: engine position front horizontal engine type 2ZZ-GE L4 DOHC 16V cylinder number 4 cylinder diameter/stroke (mmXmm) 82.00 × 85.00 displacement (mL) 1796 compression ratio 11.50:1 ignition mode EFI maximum power (kw) 191.6 PS (140.9 kW)/7800 rpm torque (N.m) 180.0 Nm (18.4 kgm)/6800 rpm 0-100 km/h acceleration time (s) 7.20 chassis parameters: transmission type 6MT main reduction ratio 4.53 suspension (front/rear) front MacPherson with stabilizer bar rear double A-arm with stabilizer bar brake device type (front/rear) ）Front and rear disc with ABS body parameters: number of doors 2, number of seats 2, wind resistance coefficient 0.320, minimum turning diameter 11.40