The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
Wheelbase (front and rear) (mm) 1490/1480 Engine parameters: engine position front horizontal engine type 2ZZ-GE L4 DOHC 16V cylinder number 4 cylinder diameter/stroke (mmXmm) 82.00 × 85.00 displacement (mL) 1796 compression ratio 11.50:1 ignition mode EFI maximum power (kw) 191.6 PS (140.9 kW)/7800 rpm torque (N.m) 180.0 Nm (18.4 kgm)/6800 rpm 0-100 km/h acceleration time (s) 7.20 chassis parameters: transmission type 6MT main reduction ratio 4.53 suspension (front/rear) front MacPherson with stabilizer bar rear double A-arm with stabilizer bar brake device type (front/rear) )Front and rear disc with ABS body parameters: number of doors 2, number of seats 2, wind resistance coefficient 0.320, minimum turning diameter 11.40
Copyright © 2021.Company name All rights reserved.