tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Celica introduce

Wheelbase (front and rear) (mm) 1490/1480 Engine parameters: engine position front horizontal engine type 2ZZ-GE L4 DOHC 16V cylinder number 4 cylinder diameter/stroke (mmXmm) 82.00 × 85.00 displacement (mL) 1796 compression ratio 11.50:1 ignition mode EFI maximum power (kw) 191.6 PS (140.9 kW)/7800 rpm torque (N.m) 180.0 Nm (18.4 kgm)/6800 rpm 0-100 km/h acceleration time (s) 7.20 chassis parameters: transmission type 6MT main reduction ratio 4.53 suspension (front/rear) front MacPherson with stabilizer bar rear double A-arm with stabilizer bar brake device type (front/rear) ）Front and rear disc with ABS body parameters: number of doors 2, number of seats 2, wind resistance coefficient 0.320, minimum turning diameter 11.40