air conditioning compressor introduce

On the lower right corner of the engine belt, below the generator. The car air conditioning compressor is installed on the engine, and the belt drives the car air conditioning compressor to work together with the engine. You can find the specific location of the car air conditioning compressor by looking for the belt. The following is an introduction to the car air conditioning compressor: 1. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, The compressor plays a role in compressing and transporting refrigerant vapor. There are two types of compressors: constant displacement and variable displacement. According to different working principles, air conditioning compressors can be divided into fixed displacement compressors and variable displacement compressors. 2. In the entire system, the compressor is responsible for compressing and driving the refrigerant. Under the drive of the engine, it continuously sucks in the low-temperature and low-pressure refrigerant vapor generated by the heat absorption and vaporization in the evaporator, which is compressed to form high-temperature and high-pressure refrigerant vapor, Discharged into the condenser, it creates high-pressure conditions for the refrigerant to continuously condense and release heat in the condenser. At the same time, it overcomes the circulating flow resistance of the refrigerant in the refrigeration circuit. Helps the automotive parts platform to provide ordering services for original parts of air conditioning compressors for various vehicle models)

Steps for disassembling and assembling automotive air compressors:

Steps for disassembling and assembling a car air compressor: 1. Disassembly sequence of the compressor: Disconnect the power supply, discharge the refrigerant from the compressor, remove the high-pressure and low-pressure pipes respectively, and seal the nozzles of the high-pressure and low-pressure pipes to prevent foreign objects or air from entering. Disconnect the wires of the electromagnetic clutch. Use a special tool to loosen the fixing bolts of the compressor, remove the triangular belt, and the compressor can be removed. 2. Installation sequence of the compressor: When installing the compressor, It should be noted that the groove surfaces of the clutch pulley and the engine pulley are corresponding and on the same plane. The gap between the condenser and the fan should not be less than 20 millimeters, and the standard gap between the compressor, compressor seat, and hose is 15 millimeters. To prevent refrigerant leakage, please replace the O-ring when installing the high-pressure and low-pressure pipes of the compressor. Tighten all fasteners with the specified tools and torque. Finally, Check for leaks in the engine fuel supply system and cooling system

HiLux introduce

The Toyota HILUX (imported) TOYOTA HILUX is an SUV that leans towards road performance. Toyota has always been a loyal supporter of SUVs, and compared to the LC series PRADO, HILUX places more emphasis on road performance. Although it has been rooted in the North American market for many years and has sold over 1.2 million vehicles (known as 4RUNNER in North America), most people who buy it will not use it to travel mountains and rivers, The spacious interior and powerful design make it a competent SUV. Although the TOYOTA HILUX SURF provides passengers with a luxurious road riding experience, it still has a certain ability to endure hardships. The secret is the non constant TORSEN variable four-wheel drive mode, combined with the latest technology, similar to Land Rover's HDC downhill control system, which has TOYOTA's deep off-road capabilities, The powerful power system is also its advantage. Although it still uses the previous generation power system, the top tier 3-liter diesel engine can reach a maximum torque of 35.9kgm, and the North American version of 4RUNNER is even equipped with a top tier 4.7 displacement 235 horsepower gasoline engine