Throttle assembly introduce

The function of the throttle valve assembly is as follows: 1. The throttle valve of a car is a controllable valve used to control the air entering the engine. After entering the intake pipe, it mixes with gasoline (different vehicles have different mixing parts) to become a combustible mixture gas, participating in combustion and doing work. It is one of the steps to provide power for the vehicle; 2. The throttle valve is the most important component of today's electronic fuel injection vehicle engine system. Its upper part is the air filter, and the lower part is the engine block, which is the throat of the car engine and controls the vehicle's travel speed; 3. The agility of a car's acceleration is closely related to the cleanliness of the throttle valve. The owner controls the throttle valve opening by stepping on the acceleration valve to achieve the goal of slowing down)

Installation position of throttle body

The throttle body is installed at the intake manifold of the engine. The throttle body mainly includes two types: traditional cable type and electronic throttle. The traditional engine throttle control mechanism works by connecting one end to the accelerator pedal and the other end to the throttle linkage plate through a cable (soft steel wire) or rod. The electronic throttle is mainly controlled by the throttle position sensor to control the opening angle of the throttle according to the required energy of the engine, So as to adjust the size of the intake volume. The throttle valve is installed in front of the manifold and behind the hose. The throttle valve is a controllable valve that controls the air to enter the engine. After the gas enters the intake pipe, it will mix with gasoline to form a combustible mixture, which burns and does work. The phenomenon of a broken throttle valve is: 1. The engine idle is unstable, and the high idle does not decrease continuously; 2. Difficulty in starting the engine; 3. Insufficient engine power, poor acceleration performance, and unstable operation; 4. The exhaust pipe of the car emits black smoke; 5. The engine malfunction light is on. The method to clean the throttle valve is: 1. Turn off the ignition switch and remove the negative pole of the battery; 2. Remove the throttle cable, intake hose, and screws securing the throttle valve in sequence; 3. Use cleaning agent to clean the throttle valve, and wipe any areas that cannot be cleaned with cotton thread

HiLux introduce

The Toyota HILUX (imported) TOYOTA HILUX is an SUV that leans towards road performance. Toyota has always been a loyal supporter of SUVs, and compared to the LC series PRADO, HILUX places more emphasis on road performance. Although it has been rooted in the North American market for many years and has sold over 1.2 million vehicles (known as 4RUNNER in North America), most people who buy it will not use it to travel mountains and rivers, The spacious interior and powerful design make it a competent SUV. Although the TOYOTA HILUX SURF provides passengers with a luxurious road riding experience, it still has a certain ability to endure hardships. The secret is the non constant TORSEN variable four-wheel drive mode, combined with the latest technology, similar to Land Rover's HDC downhill control system, which has TOYOTA's deep off-road capabilities, The powerful power system is also its advantage. Although it still uses the previous generation power system, the top tier 3-liter diesel engine can reach a maximum torque of 35.9kgm, and the North American version of 4RUNNER is even equipped with a top tier 4.7 displacement 235 horsepower gasoline engine