Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Ford Motor Company has launched the first generation Fiesta to the market, with a basic model equipped with a 1.0-liter engine and a power of 30 kilowatts. It is the lightest car in its class, with a small drag coefficient that greatly reduces fuel consumption. Fuel economy was a key factor for the success of the Ford Fiesta during the energy crisis, but this is not its only advantage. It has good handling and a rich sense of sportiness
Copyright © 2021.Company name All rights reserved.