The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The appearance of the Mustang is simple and unadorned, but it exudes a wild and unpretentious simplicity from its core. Everything is practical, which is a prominent feature of the Mustang. The front face appears too conservative, not much different from a regular sedan, and does not show the dominance of a sports car at all. The two broken lines on the engine compartment cover finally adjust the atmosphere for the entire front part. The entire dynamic feeling seems to come from the emblem of that Mercedes Benz Mustang, The black honeycomb grille further accentuates the grandeur of the chrome badge. It is said that the eyes are the window of the soul, and it seems that the plain front headlight group bears the main responsibility for the low and imposing appearance of the entire vehicle
Copyright © 2021.Company name All rights reserved.