Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Audi Q7 introduce

The Audi Q7 is a full-size SUV that emphasizes comfort, cleverly integrating sportiness, functionality, high technology, and luxury quality. On the road, it stands out with its infinite dynamic handling and sporty characteristics; On off-road roads, its powerful driving force is even more impressive. Undoubtedly, the Audi Q7 is another groundbreaking masterpiece of the founder of quattro technology at Audi. The Audi Q7 is a luxury sedan produced by Audi, with two modes: racing and station wagon. Its main competitors include the Marseille Mercedes Benz M-Class The BMW X5, Lexus RX, and Volvo XC90. The design and construction of this model are similar to those of the Volkswagen Touareg and Porsche Cayenne series in the same group. The new Audi Q7 has officially been launched in China, representing the Audi brand's entry into the domestic SUV market. The top luxury SUV market is the first to be seized. With its extraordinary charm, the Audi Q7 has also attracted the attention of many consumers in China. Recently, Audi announced that, The Audi Q7, a large SUV, will launch the 2010 new model, which will be equipped with new LED lighting and human-machine interface design