The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The newly launched Ailfa is a new model designed by a well-known Japanese automotive design company and has made many improvements to meet the needs of Chinese consumers. It is a new model launched by Foton after three years of technological accumulation and market understanding. Its exterior design incorporates the essence of sedan design, and the tail and front of the car echo each other, with a full and smooth design. It is a luxurious tail light combination that integrates turn signals, reverse lights, and fog lights, This makes the appearance of the Alphard look rugged and bold. The engine produced by Alphard with advanced foreign technology is the power core of the car, with a multi-point electronic fuel injection system and a fuel consumption of only 8 liters per 100 kilometers. It has the advantages of good economy, smooth operation, high output power, high horsepower, and good acceleration
Copyright © 2021.Company name All rights reserved.