Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
China is ushering in a new wave of urbanization, with an unprecedented increase in demand for urban logistics. However, there is a sharp conflict between current urban logistics and modern urban management. On the one hand, the volume of urban logistics is constantly increasing, and the demand for logistics vehicles is growing. On the other hand, due to considerations of urban image and management, the ban on freight vehicles in the main urban areas of major and medium-sized cities is also increasing, Causing difficulties for the most suitable heavy-duty trucks, light trucks, and pickup trucks to enter the city, and mini vans that could have been replaced are also being replaced by big cities“
Copyright © 2021.Company name All rights reserved.