Luggage compartment lid introduce

The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)

Installation and replacement process of luggage compartment lid/trunk lid

An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly

GAC Geely Shuai Wei introduce

The Geely Shuai Wei SUV has a simple design with a V-shaped front face and a spacious interior, divided into standard and luxury models. It is a SUV designed for families, leisure, and business purposes. It uses crystal combination headlights, intelligent reverse mirrors, and an in car VCD LCD display system. There are three types of engines, and the jm491q me/ga491qe/bj491eq1 can meet the different practical needs of customers The displacement is 2.23l, with a maximum power of 75kw/4600rpm. The economic fuel consumption is 7.8l/100km, and the engine emissions meet Euro II standards Minimum turning diameter of 12 meters, minimum ground clearance of 185mm, non load bearing body, front and rear load sensing ratio valves, 15 aluminum alloy wheels, power steering, front three-point pre tensioned seat belts, rear seat belts, front disc and rear drum brakes In addition, in the luxury model, it is equipped with electronic rearview mirrors, LCD reverse radar, and temperature display