electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

GAC Geely Shuai Wei introduce

The Geely Shuai Wei SUV has a simple design with a V-shaped front face and a spacious interior, divided into standard and luxury models. It is a SUV designed for families, leisure, and business purposes. It uses crystal combination headlights, intelligent reverse mirrors, and an in car VCD LCD display system. There are three types of engines, and the jm491q me/ga491qe/bj491eq1 can meet the different practical needs of customers The displacement is 2.23l, with a maximum power of 75kw/4600rpm. The economic fuel consumption is 7.8l/100km, and the engine emissions meet Euro II standards Minimum turning diameter of 12 meters, minimum ground clearance of 185mm, non load bearing body, front and rear load sensing ratio valves, 15 aluminum alloy wheels, power steering, front three-point pre tensioned seat belts, rear seat belts, front disc and rear drum brakes In addition, in the luxury model, it is equipped with electronic rearview mirrors, LCD reverse radar, and temperature display