ABS, translated as "anti lock braking system" in Chinese, is one of the three great inventions in the history of automotive safety, along with airbags and seat belts. It is a car safety control system with advantages such as anti slip and anti lock ABS is an improved technology based on conventional braking devices, which can be divided into mechanical and electronic types. Modern cars are extensively equipped with anti lock braking systems. ABS not only has the braking function of ordinary braking systems, but also prevents wheel lock up, allowing the car to still turn in the braking state, ensuring the stability of the car's braking direction, and preventing sideslip and deviation. It is currently the most advanced and most effective braking device in cars)
1. First, disconnect the negative wire harness. 2. Then pull up the locking pin of the ABS pump plug, and separate the plug. 3. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 4 brake lines from the ABS pump. 4. Use a wrench to turn counterclockwise and unscrew the fixing nut to separate the 2 brake lines below from the ABS pump. 5. Separate the two plugs above the engine compartment. 6. Use a tool to remove the fixing screw of the ABS pump bracket
The safety of Hafei Public Opinion is mainly reflected in the body structure. The beam is the main support point for safety in the body. The beam of this car is completely different from the previous micro surface beam, and a new design has been made. Not only is the cross-section of the beam larger than the original micro surface car, but the direction of the beam has also been simulated and optimized. Compared with other similar cars, it is different and the structure is more reasonable, not only fully considering the requirements of collision safety, It also integrates safety into the entire design of the vehicle body
Copyright © 2021.Company name All rights reserved.