Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Hafei Public Opinion M408 introduce

Hafei Minyi's multi sided and irregular headlights are eye-catching and dazzling. The overall design of the vehicle is full, with smooth lines, simple and rich in rhythm. While meeting its functions, it provides people with a beautiful enjoyment. Not only does it reflect the cultural heritage of the East, but it also exudes a strong modern atmosphere. It is an organic combination of carefree and carefree, rough and delicate, with strong foresight. Hafei Minyi's entire vehicle adopts a short nose, metal fully loaded body structure to reduce air resistance, Meet the requirements of collision regulations. Green and environmentally friendly fluorine free air conditioning system (optional), creating comfort and coolness in spring The heart of a car - the engine has strong power and can be equipped with multiple varieties of Dongan company's series of electronic fuel injection engines, meeting different output power requirements while meeting the Euro II standard for emissions While enjoying the pleasure of driving, safety is the most important. The seat belt is equipped with the driver's side airbag (optional) (co pilot airbag can also be optional) and ABS anti lock braking system (optional) to ensure your safety when traveling. The body structure also fully considers collision safety requirements, and a collision bar is installed inside the front door to enhance impact resistance; The Hafei public opinion frame adopts the internationally advanced beam section structure, with five crossbeams and three longitudinal beams arranged reasonably, simple and practical. After strength verification and simulation analysis, the front part of the longitudinal beam absorbs 70% of energy, fully meeting the requirements of collision regulations Comfortable and spacious seating space with 7-8 seats to choose from. The front seats can be adjusted front and rear to meet the requirements of drivers of different body types. The rear seats can be folded forward to provide convenience for loading At present, Hafei Minyi is the latest model in its series