Front lower swing arm introduce

The function of the front wheel lower control arm is to support the vehicle body, fix and support the wheels. The front wheel lower control arm is usually made of steel material, and the use of this material's control arm is due to its high strength, elongation, excellent formability and flanging performance, good rust prevention performance, and effective buffering of vibration generated during car driving. The function of the car lower control arm is to cushion vibration during car driving, Among them, the shock absorber is used to cooperate with the swing arm and play a buffering role. 2. Material: The swing arm has a variety of materials, including aluminum alloy, cast iron, double-layer stamped parts, single-layer stamped parts, all of which have advantages and disadvantages. Stamped parts have better toughness, but their strength is not enough, and they are easy to break under impact. 3. Rust prevention: You can usually check whether the swing arm is rusted by yourself. The position of the swing arm is located in the component connecting the front tire and the center of the car, which is easy to check, If rust is found, it is necessary to promptly go to the 4S store for treatment to prevent accidents caused by breakage)

Steps to replace the car's lower control arm:

The steps to replace the car's lower swing arm: 1. Remove the screw of the welding part between the swing arm and the front axle. This screw can be removed together with a No. 18 socket and wrench, without any obstruction around it, making it easy to disassemble. Remove the fixing screw of the support rod, where there are two screws connected to the lower swing arm, just remove these two screws; 2. Remove the fixing screw of the steering knuckle. This screw is slightly harder than the first two. You can use a No. 16 wrench to match the No. 16 socket to remove the screw and screw. Remove the swing arm. After removing all screws, you can use a hammer to knock down the swing arm. Pay attention to safety when knocking on the door; 3. Install a new connecting screw between the rocker arm and the steering knuckle. The installation process is relatively simple, just reverse the disassembly process and tighten the screw according to the specified torque. When installing the screw, tap the rocker arm upwards until the fixing bolt can pass through smoothly. Install the support rod fixing screw. After connecting the rocker arm to the support rod, tighten the two screws. 4. Install the fixing screws of the welded parts. As long as the holes are aligned, the bolt can pass through smoothly, Tighten the nut installation. In summary, it is best to perform four-wheel alignment on the vehicle after replacing the swing arm to prevent it from going in the wrong direction

Hafei Public Opinion M408 introduce

Hafei Minyi's multi sided and irregular headlights are eye-catching and dazzling. The overall design of the vehicle is full, with smooth lines, simple and rich in rhythm. While meeting its functions, it provides people with a beautiful enjoyment. Not only does it reflect the cultural heritage of the East, but it also exudes a strong modern atmosphere. It is an organic combination of carefree and carefree, rough and delicate, with strong foresight. Hafei Minyi's entire vehicle adopts a short nose, metal fully loaded body structure to reduce air resistance, Meet the requirements of collision regulations. Green and environmentally friendly fluorine free air conditioning system (optional), creating comfort and coolness in spring The heart of a car - the engine has strong power and can be equipped with multiple varieties of Dongan company's series of electronic fuel injection engines, meeting different output power requirements while meeting the Euro II standard for emissions While enjoying the pleasure of driving, safety is the most important. The seat belt is equipped with the driver's side airbag (optional) (co pilot airbag can also be optional) and ABS anti lock braking system (optional) to ensure your safety when traveling. The body structure also fully considers collision safety requirements, and a collision bar is installed inside the front door to enhance impact resistance; The Hafei public opinion frame adopts the internationally advanced beam section structure, with five crossbeams and three longitudinal beams arranged reasonably, simple and practical. After strength verification and simulation analysis, the front part of the longitudinal beam absorbs 70% of energy, fully meeting the requirements of collision regulations Comfortable and spacious seating space with 7-8 seats to choose from. The front seats can be adjusted front and rear to meet the requirements of drivers of different body types. The rear seats can be folded forward to provide convenience for loading At present, Hafei Minyi is the latest model in its series