electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Audi S8 introduce

The Audi S8 is the sporty performance version of the Audi A8. The all-new Audi S8 is only modified from the new A8 in terms of exterior and interior details. In terms of exterior design, the Audi S8 is not much more aggressive than the regular A8. In terms of power, the all-new Audi S8 is equipped with a 4.0TFSI twin turbocharged engine, with a maximum power of no less than 520 horsepower and a continuous torque output of 650N · m at 1700rpm-5500rpm. Audi launched the first generation S8 as early as 1994, As the sport version of Audi's top luxury car A8, it applied all of Audi's top technologies at the time, such as an all aluminum body frame and full-time four-wheel drive. Luxury cars were originally aimed at high-end demand, and most of them should be aimed at rear seat users, so the sport version S8 that leans towards driving pleasure is definitely only aimed at a few out of a few. Audi had been optimistic about this niche market for a decade, and now continues to make every effort to launch the new generation S8, And still playing the role of "Audi's cutting-edge technology collection"