The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)
An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly
The first impression that Hafei Racing gives people is still solid and steady, with sharp and angular body lines. The changes in appearance are mainly concentrated on the front face. The slender headlights are divided into two from the inside, with the upper part being a three-dimensional diamond high beam and low beam, and the lower part being a turn signal light. The middle is decorated with metal strips, forming a multi-layered and three-dimensional feeling visually, which is beautiful and generous
Copyright © 2021.Company name All rights reserved.