Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

like introduce

The brake system, consisting of a front disc and rear drum dual circuit hydraulic brake, vacuum assist device, and load sensing proportional valve, is sensitive and reliable. Equipped with an optional ABS anti lock braking system, the entire vehicle has excellent braking stability. The pillars and frame are reinforced, forming a sturdy body with an integral side panel. The bumper is equipped with strong energy absorbing buffer blocks, and laminated glass can avoid secondary injury after collision. At the same time, the rear prominent high mounted combination lights and fog lights, the front two rows of three-point seat belts are standard equipment, and airbags are optional