Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Hager Card introduce

After being launched in May 2011 and operating under the concept of "passenger truck" for more than half a year, Hagrid pickup trucks have gradually faded out of people's sight for some reason. They have been replaced by the name "Yujun", which some people understand as "driving the wind", hoping to one day surpass the wind. Later, Hagrid Automobile named their 4JB1TI diesel pickup truck "New Isuzu" pickup truck, which is manufactured by Chengdu Engine Factory, Originating from Isuzu Technology in Japan, it is named the "New Isuzu" pickup truck to distinguish it from other pickup truck products with Isuzu Technology engines on the market. However, the name "Yujun" is still used. Currently, the official name of this pickup truck product should be "Hagrid Yujun"