The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
After being launched in May 2011 and operating under the concept of "passenger truck" for more than half a year, Hagrid pickup trucks have gradually faded out of people's sight for some reason. They have been replaced by the name "Yujun", which some people understand as "driving the wind", hoping to one day surpass the wind. Later, Hagrid Automobile named their 4JB1TI diesel pickup truck "New Isuzu" pickup truck, which is manufactured by Chengdu Engine Factory, Originating from Isuzu Technology in Japan, it is named the "New Isuzu" pickup truck to distinguish it from other pickup truck products with Isuzu Technology engines on the market. However, the name "Yujun" is still used. Currently, the official name of this pickup truck product should be "Hagrid Yujun"
Copyright © 2021.Company name All rights reserved.