Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Audi TT introduce

The Audi TT is a sports car developed by Audi, which was first launched in 1998. As a sports sedan, the TT model has achieved great success in the market with its almost identical beautiful appearance and excellent performance to the concept car version. In the early stages of the first generation, some car owners complained about unstable high-speed turning and accidents. Audi adjusted the suspension system of the TT and added a rear spoiler version to the rear of the car, reducing the lift at the rear of the Audi TT from 148 pounds to 53 pounds at a speed of 125 miles per hour, The 64 pound rear lift of the BMW Z3 Coupe and the 68 pound Porsche Boxster, as well as the 104 pound Mercedes SLK, are lower than those of the same period at the same speed. The Audi TT is a pure sports car. There are three models sold in China, namely the TT Coupe 1.8t, TT 2.0TSI, and TT 3.2quattro convertible (soft top). Audi continues to launch a series of completely new cars, from A4.A6 to the current A8 and TT. [2] Audi TT's competitors include BMW X1, Mercedes SLK, etc