Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Audi 200 sedan adopts a V6 cylinder electronically controlled multi-point fuel injection gasoline engine, which has advanced structures and designs such as an electronically controlled multi-point injection system and a variable intake pipe. It has strong power performance, superior economy, outstanding low noise, and good emissions. It is the ideal choice for official vehicles at that time. The appearance of the Audi 200 and Audi 100 are almost the same, On June 23, 1998, FAW Volkswagen introduced the Audi 200 1.8t sedan to the market, filling the gap in the domestic turbocharged engine product and representing the highest level of China's sedan industry. The Audi series consists of three varieties: Audi 2002.4 liters, 2.06 liters, and Audi 2001.8 tons
Copyright © 2021.Company name All rights reserved.