The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Audi A4 is the name of a car, first manufactured and launched by FAW Volkswagen in April 2003. The domestically produced A4 was put into production in China on February 21, 2003, and the new domestically produced Audi A4 was officially launched on October 25, 2005. The Audi A4 is a product under the Audi company, with a high-tech appearance and higher performance than ordinary mid size cars, so it is favored by most car enthusiasts. Equipped with the latest Audi logo! The symbol of nobility was the introduction of the 1.8T.2.4L.3.0L, with only the 1.8 basic model being equipped with a manual transmission, while the rest were equipped with a continuously variable/automatic CVT transmission
Copyright © 2021.Company name All rights reserved.