Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Huanghai Qisheng F1 introduce

The Qisheng F1 is equipped with ABS EBD anti lock braking system, precise computer control, anti lock braking, anti tailspin, ensuring safety, advanced safety airbags, carefully taking care of your life safety. The four doors are equipped with reinforced anti-collision bars, and the front and rear of the frame are equipped with protective steel beams, effectively reducing the damage of collisions from all directions to the entire vehicle. At the same time, the new Qisheng adopts a pure Mitsubishi chassis, with a double wishbone independent suspension on the front axle and an internationally popular five link spiral spring structure on the rear suspension, Driving brake with four-wheel disc brake, parking hub type brake, rear wheel hub combination, unparalleled braking performance. Front cup holder, coin box, front door storage compartment, passenger storage compartment, trunk storage compartment, etc., considerate, practical, and user-friendly design fully demonstrate