The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)
The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan
The Qisheng F1 is equipped with ABS EBD anti lock braking system, precise computer control, anti lock braking, anti tailspin, ensuring safety, advanced safety airbags, carefully taking care of your life safety. The four doors are equipped with reinforced anti-collision bars, and the front and rear of the frame are equipped with protective steel beams, effectively reducing the damage of collisions from all directions to the entire vehicle. At the same time, the new Qisheng adopts a pure Mitsubishi chassis, with a double wishbone independent suspension on the front axle and an internationally popular five link spiral spring structure on the rear suspension, Driving brake with four-wheel disc brake, parking hub type brake, rear wheel hub combination, unparalleled braking performance. Front cup holder, coin box, front door storage compartment, passenger storage compartment, trunk storage compartment, etc., considerate, practical, and user-friendly design fully demonstrate
Copyright © 2021.Company name All rights reserved.