Transmission valve body: Introduction to the transmission valve body: 1. The transmission valve body can be used for shifting between high and low gears. When the vehicle speed reaches a certain gear, hydraulic oil pushes the valve body to automatically shift the gear to that gear. The automatic transmission can automatically change the transmission ratio according to the engine load and speed, so that the car can achieve good power and fuel economy, and reduce engine emissions pollution. 2. The automatic transmission is easy to operate, When vehicles are congested, it can greatly improve the safety and reliability of vehicle operation. Electronic controlled automatic transmissions are usually composed of five parts: hydraulic torque converter, planetary gear transmission system, shift actuator, hydraulic control system, and electronic control system)
The function of the gearbox valve body is to drive the gearbox to shift high and low. The gearbox valve body controls various shifting mechanisms by converting the oil circuits inside the valve body. Of course, there may be damage to components on the vehicle, such as the gearbox valve body. The reasons for damage may include the following: 1. Insufficient internal pressure caused by structural damage or insufficient sealing inside the valve body, resulting in difficulty in separating or combining shifting actions; 2. The electromagnetic valve or mechanical part inside the valve body is damaged, causing the original function to not function properly; 3. If the oil in the valve body is used for too long and there are too many impurities in the oil, it will cause the valve body to operate slowly. If the time is too long, it will exacerbate the wear of the valve body. Symptoms of a damaged transmission valve body: 1. Impact sensation during upshifting and downshifting, and obvious jerking during shifting; 2. There is a strong jerking sensation when shifting gears, and the shifting motion is not smooth, etc; 3. The gearbox makes abnormal noises while driving; 4. The instrument panel displays a transmission fault light
The Qisheng F1 is equipped with ABS EBD anti lock braking system, precise computer control, anti lock braking, anti tailspin, ensuring safety, advanced safety airbags, carefully taking care of your life safety. The four doors are equipped with reinforced anti-collision bars, and the front and rear of the frame are equipped with protective steel beams, effectively reducing the damage of collisions from all directions to the entire vehicle. At the same time, the new Qisheng adopts a pure Mitsubishi chassis, with a double wishbone independent suspension on the front axle and an internationally popular five link spiral spring structure on the rear suspension, Driving brake with four-wheel disc brake, parking hub type brake, rear wheel hub combination, unparalleled braking performance. Front cup holder, coin box, front door storage compartment, passenger storage compartment, trunk storage compartment, etc., considerate, practical, and user-friendly design fully demonstrate
Copyright © 2021.Company name All rights reserved.