Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Huanghai Qisheng F1 introduce

The Qisheng F1 is equipped with ABS EBD anti lock braking system, precise computer control, anti lock braking, anti tailspin, ensuring safety, advanced safety airbags, carefully taking care of your life safety. The four doors are equipped with reinforced anti-collision bars, and the front and rear of the frame are equipped with protective steel beams, effectively reducing the damage of collisions from all directions to the entire vehicle. At the same time, the new Qisheng adopts a pure Mitsubishi chassis, with a double wishbone independent suspension on the front axle and an internationally popular five link spiral spring structure on the rear suspension, Driving brake with four-wheel disc brake, parking hub type brake, rear wheel hub combination, unparalleled braking performance. Front cup holder, coin box, front door storage compartment, passenger storage compartment, trunk storage compartment, etc., considerate, practical, and user-friendly design fully demonstrate