Front turn signal introduce

Turn signal is an important indicator light that is activated when a motor vehicle turns to remind the front, rear, left, right, and pedestrians to pay attention. The turn signal tube uses xenon gas tubes, a microcontroller control circuit, and the left and right rotate continuously to flash. The turn signal uses a flasher to achieve light flashing. It can be mainly divided into three types: wire blocking, capacitive, and electronic. Among them, wire blocking can be further divided into hot wire (electric heating) and wing type (bouncing), Electronic flashers can be divided into hybrid (with contact relays and electronic components) and fully electronic (without relays). For example, pop-up flashers use the principle of electric current thermal effect, which uses thermal expansion and contraction as power to cause sudden changes in the spring plate to connect and disconnect the contacts, achieving flashing lights. Turn signals are the most important device that represents the dynamic information of the car, installed in front and behind the body, and can be turned on when the car turns, providing safety assurance for driving, For your and others' safety, please use turn signals according to regulations, so that people can know the direction of the car in advance and make correct judgments)

Installation of front turn signals/rear turn signals/LED daytime running lights/side marker lights/front and rear position lights

Tool preparation: 1. First, we need to prepare the tools required for the entire process of installing car turn signals, including a screwdriver and a wire hook. Then, we need to prepare the car turn signals that need to be installed. 2. Turn on the double flash. As shown in the figure, open the car's key door, and press the switch button of the double flash by hand. This way, the car's double flash will open. Observe the position of the turn signal wire harness. Now we can take out the iron hook, You can make this iron hook yourself, just put it on a wire head. It's quite simple because we have a dual flash, so we can observe the position of the turn signal harness through the hole. 3. Hook out the turn signal. As shown in the figure, after we find the position of the turn signal harness, we use the small iron hook made to hook the harness, and then hook out the turn signal. Be careful to hook it slowly, Avoid disconnecting the wiring harness, and also be careful not to scratch the surface of the car, which may affect its appearance. For the first time installing a car turn signal, as shown in the figure, take out the car turn signal that needs to be installed. Let's take a closer look. There are two small snap holes on the turn signal lampshade that can be directly attached to the turn signal. Please find a good position and gently attach the turn signal to the lampshade. 4. Installation of the car turn signal. As shown in the figure, Gently clip the pre installed car turn signal light onto the card hole on the body of the car, making sure the position of the card is accurate. There is a small iron plate on one side of the turn signal light, so we need to install the plastic side first, and then gently fasten the side with the small iron plate!

Jiangnan Scenery introduce

The appearance style of Jiangnan scenery is simple and elegant, leaving a deep impression. It adopts a three box design, with streamlined and smooth body lines. The center of the chrome trim on the front face is the "Double Swallows" logo of Jiangnan Automobile, like two swallows whispering in the spring light. The front headlights and turn signals of the car are crystal clear lights, and the red side turn signals are like red agate, Reflecting with crystals, it shines brightly. On both sides of the intake of the chrome trim are equally crystal clear front fog lights, with waterfall stripes on top, like tassels embellishing on both sides of the front bumper. The rear headlights are combination taillights, red and white, warm and simple, complemented by oval and curved line combinations, showing full charm According to the data, the basic configuration of the "Jiangnan Fengguang" with a 1.8L environmentally friendly engine as the power core is quite "high-end": six segment adjustable electric seats, electric sunroof, central control door lock, reverse radar, safety airbag, ABS anti lock braking system, 6-disc CD, and other high-end sedan configurations are all available on the "Jiangnan Fengguang". Consumers can also choose to install hands-free car phones, satellite navigation systems, etc. according to their needs