The sheep horn of a car is called a "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn". The steering knuckle, also known as a "sheep horn", is one of the important parts in the steering axle of a car, which can make the car stable and sensitively transmit the direction of travel. The function of the steering knuckle is to transmit and bear the front load of the car, Support and drive the front wheels to rotate around the main pin, causing the car to turn. In the driving state of the car, it bears variable impact loads, so it is required to have high strength. The front axle is equipped with a front axle head on the axle and a steering arm on the seat, just like a sheep horn, so it is called a sheep horn. Generally, it is connected to the front axle by the Liren axle, which is often the case on trucks, Nowadays, cars are all equipped with independent suspensions. Hello, the sheep horn of a car is also known as the steering knuckle assembly. The steering knuckle is one of the main components on the steering axle of a car, which can ensure stable driving and sensitively transmit the direction of travel. The function of the steering knuckle is to bear the load on the front of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears variable impact loads. Therefore, Require it to have high strength. Kingpin inclination angle and front wheel camber angle)
If the car horn needs to be replaced, it is recommended to go to a repair shop for replacement. Generally, it cannot be replaced by oneself, which is quite complex. The function of the car horn is as follows: 1. The role of the car horn is to transmit and bear the front load of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears a variable impact load, so it requires high strength; 2. The sheep horn of a car is called the "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn"; 3. The steering knuckle, also known as the "steering knuckle", is one of the important components of a car's steering, which can make the car run smoothly, stably, and sensitively transmit the direction of travel. Generally, replacing the steering knuckle requires going to a 4S store. The steering knuckle of a car is called the "steering knuckle" or "steering knuckle arm", which is located on both sides of the front I-beam and bears the steering function of the axle head. It is somewhat like a sheep horn, So it is commonly known as "sheep horn". It is recommended to consult the sales personnel or after-sales technicians of 4S dealerships. If the sheep horn is replaced, the wheels need to be disassembled. If the brake cylinder is replaced, the wheels, brake cylinder, steering rod, support arm, and wheel bearings need to be disassembled. After replacement, four-wheel alignment should be done
The sixth generation of Jinbei Haishi not only inherits the reliable quality of the Jinbei brand, but also establishes a new concept for domestic light passenger cars in terms of "safety assurance, sedan experience, energy conservation and environmental protection, and flexible handling". The sixth generation of Jinbei Haishi has achieved multiple technological breakthroughs in body safety design, making it the first light passenger car in China to meet the 40% frontal offset collision regulations; The brand new sedan style interior and exterior design brings more sedan enjoyment; A variety of powertrain options, not only efficient and energy-saving, but also meet Euro IV emission standards; The optimization of the vehicle chassis structure has further improved the handling performance of the entire vehicle. In 2012, it won the national light passenger market sales championship and has a market share of nearly 800000. Originating from the economic use cost and convenient service network of Jinbei Haishi, it dominates the same level of products. The Jinbei brand has established a broad and solid market foundation, even though the market is constantly changing, Jinbei Haishi has always been able to meet the needs of consumers. After six generations of technological innovation, the launch of the sixth generation of Jinbei Haishi, as one of the most forward-looking products of Huachen Motors, will establish a new concept for light passenger transportation and lead the development trend of the light passenger market
Copyright © 2021.Company name All rights reserved.