transmission housing introduce

Transmission housing: The transmission housing and cover are used to install the transmission mechanism, shifting device, and some control mechanisms, while storing lubricating oil. In order to reduce the weight of the car, for sedans, the transmission housing and cover are often made of aluminum alloy or magnesium alloy. The transmission housing and cover of medium and heavy vehicles are generally made of cast iron to ensure their strength requirements. The material of the transmission housing is gray cast iron, commonly used as HT200. The transmission housing is the basic component, Used for installing and supporting all parts of the gearbox and storing lubricating oil. It has precise boring holes for installing bearings. The gearbox bears variable loads, so the housing should have sufficient stiffness, with reinforced inner walls and complex shapes, mostly made of castings (made of gray cast iron, commonly HT200). For ease of installation, the transmission and control parts are often made into split sections, and the box cover is connected to the housing by bolts and reliably positioned. There are oil filling and drainage ports, and oil level inspection dipstick ports on the housing, Heat dissipation should also be considered)

Common faults of automatic transmissions include:

Common faults of automatic transmissions include: 1. Oil leakage: Oil seeps out from the gearbox housing or oil pan due to aging seals, poor sealing, and poor manufacturing processes, resulting in sand holes in the housing; 2. Engine shutdown when shifting into D or R gear: The engine shutdown when shifting into D or R gear may be due to damage to the locking solenoid valve; 3. Locked gear: The input and output signals of the gearbox are incorrect or the circuit components themselves have poor wiring; 4. No response when shifting: Shift into D or R gear, then release the brake and the vehicle will not move. This situation is often caused by damage to the input shaft or reverse clutch; 5. During driving, the vehicle may experience gear shifting shock and jerking, which may be caused by dirty transmission oil, resulting in valve body jamming; 6. Transmission slippage and weak acceleration: When the car is driving, there is a sound of the engine idling due to the acceleration of the fuel gate. This phenomenon is mostly caused by burnt clutch plates

Sea Lion 6th Generation introduce

The sixth generation of Jinbei Haishi not only inherits the reliable quality of the Jinbei brand, but also establishes a new concept for domestic light passenger cars in terms of "safety assurance, sedan experience, energy conservation and environmental protection, and flexible handling". The sixth generation of Jinbei Haishi has achieved multiple technological breakthroughs in body safety design, making it the first light passenger car in China to meet the 40% frontal offset collision regulations; The brand new sedan style interior and exterior design brings more sedan enjoyment; A variety of powertrain options, not only efficient and energy-saving, but also meet Euro IV emission standards; The optimization of the vehicle chassis structure has further improved the handling performance of the entire vehicle. In 2012, it won the national light passenger market sales championship and has a market share of nearly 800000. Originating from the economic use cost and convenient service network of Jinbei Haishi, it dominates the same level of products. The Jinbei brand has established a broad and solid market foundation, even though the market is constantly changing, Jinbei Haishi has always been able to meet the needs of consumers. After six generations of technological innovation, the launch of the sixth generation of Jinbei Haishi, as one of the most forward-looking products of Huachen Motors, will establish a new concept for light passenger transportation and lead the development trend of the light passenger market