Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Jinlong Kaige introduce

Jinlong Kaige is a commercial and travel vehicle under Jinlong Motors, priced between 159800 and 195800 yuan. Jinlong Kaige is positioned in the mid to high end public and business group reception and tourism markets. Its grand business style and luxurious interior configuration have attracted widespread attention from users since its debut. Compared with traditional light buses, Jinlong Kaige has a longer wheelbase and a wider body, achieving new upgrades in five aspects: appearance, space, interior, power, and safety, Li Chuang is a premium car model in the high-end light passenger market, equipped with multiple functions such as business, tourism, commuting, and special purposes. It can meet the diverse needs of different consumer groups, provide a comfortable business travel experience for enterprises, institutions, and government agencies, and also provide a variety of travel options for mid to high end business people. The appearance of the Jinlong Kaige vehicle integrates international popular fashion elements, with a streamlined high top body and a generous and personalized front face design, The front headlights adopt advanced technology of fashionable and energy-saving LED, and the selection of enclosed overall privacy glass adds a more business and fashionable atmosphere. The body size is 5470 mm × 1885 mm × 2285 mm, 3.11 meter long wheelbase, 1.55 meters indoor height, and a sliding door with an actual size of 1.68 meters. The exquisite appearance and oversized body of Jinlong Kaige create a new era of business space, fully meeting the needs of group receptions and business negotiations for large spaces