Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

cadillac srx introduce

The Cadillac SRX luxury multi-purpose vehicle made its debut at the North American International Auto Show held in Detroit in 2003. The new model in the Cadillac series is a luxury mid size multi-purpose vehicle that can adapt to almost any road condition, with a traction capacity of up to 1590 kilograms, and a driving feel like a sports sedan. It adopts the rugged and sharp appearance of its prototype concept car Vizon (2001). The SRX foreshadows the characteristics of future cars such as the new generation STS sedan SRX is based on General Motors' famous new Sigma chassis structure and offers two models: rear wheel drive and four-wheel drive, providing drivers with an excellent driving experience