Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Chrysler 300M introduce

Basic parameters: Manufacturer Chrysler brand Chrysler model (style) 2002 Chrysler 300M production time (year) 2002 Drive form Front wheel drive fuel consumption (L/100km) 10 Main dimensions and mass: Length/width/height (mm) 5024/1890/1422 wheelbase (mm) 2870 wheelbase (front and rear) (mm) 1574/1564 Rear trunk volume (L) 530 Fuel tank volume (L) 64 curb weight (kg) 1629 engine parameters: engine position front engine, longitudinally placed engine type V6 60 degree angle DOHC 24V cylinder number 6 cylinder diameter/stroke (mmXmm) 96.00 × 81.00 displacement (mL) 3518 compression ratio 9.90:1 ignition mode SMPFi maximum power (kw) 253.5PS (186.4 kW)/6400rpm maximum torque (N.m) 339.0Nm (34.6 kgm)/3900rpm chassis parameters: transmission type 4A suspension (front/rear) front lateral swing arm, elastic strut, stabilizer bar rear multi steering shaft, elastic strut, Lateral stabilizer bar braking device type (front/rear)) front and rear ventilated disc with ABS tire type and specifications (km/h) Michelin Energy MXV4 Plus P225/55 R 17 Body parameters: number of doors 4 seats 4/5 drag coefficient 0.313 minimum turning diameter 11.50 Other: domestic reference price (RMB 10000) 46 international reference price (USD 10000) 2.91