The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The first SUV under the Lifan brand will be officially launched at the Shanghai Auto Show, with an expected price of around 80000 to 100000 yuan. It is reported that the representative of the Lifan X60 is a crossover and multifunctional vehicle series. The body design of Lifan's first SUV product is somewhat similar, but the body size of the Lifan SUV is significantly smaller than the Toyota RAV4, which is in the same level as the Chery Tiggo 3
Copyright © 2021.Company name All rights reserved.