The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The first domestic car of Lianhua Auto, Jingyue, slowly opened the inspection line from the assembly workshop of Lianhua Auto Production Base in Tai'an High tech Development Zone, marking that the Tai'an plant of Lianhua Auto, which has been built for five years, has entered a substantive production stage and has the capacity to produce in large quantities. The offline of Jingyue also means that the history of Mount Taishan without car manufacturing industry is over
Copyright © 2021.Company name All rights reserved.