engine block introduce

A flow valve is a control valve that can display the instantaneous flow rate in a pipeline network. It adds a display function on the basis of a self operated flow control valve, making the balance adjustment of the pipeline network more convenient and accurate. The working conditions of the cylinder body are very harsh. It needs to withstand the sharp changes in pressure and temperature during the combustion process and the strong friction of the piston movement. Therefore, it should have the following performance: ① sufficient strength and stiffness, small deformation, ensuring the correct position of each moving part, normal operation, and low vibration noise. ② Has good cooling performance, with cooling water jackets around the cylinder barrel to allow the cooling water to carry away heat Wear resistant to ensure sufficient service life of the cylinder block. The upper part of the cylinder block is a parallel cylinder barrel, and the lower part of the cylinder block is the crankcase, which is used to install the crankshaft. It can also be used to install various accessories such as generators and engine supports on the outside. The cylinder block is mostly made of cast iron or aluminum alloy, which has a higher cost but is lightweight and has good cooling performance, and is increasingly widely used. The cylinder block is the framework of the engine, which is the installation foundation of various mechanisms and systems of the engine. It is equipped with all the main parts and accessories of the engine inside and outside, bearing various loads. Therefore, the cylinder block must have sufficient strength and stiffness. The cylinder block is mainly composed of parts such as the cylinder block, crankcase, cylinder head, and cylinder gasket. 1. The cylinder block The cover bolts should be tightened evenly and the fuel supply time should be adjusted correctly. 2. Soft water should be added to the water tank and replaced as little as possible. 3. Diesel engines should avoid working under overload for a long time. 4. When the engine is working and the water tank occasionally runs out of water, the engine should not be immediately turned off. Instead, water should be slowly added at low speed. Cold water should not be added after the engine has heated up. After parking, water should be drained after the water temperature reaches below 40 ℃. Water should not be added immediately when starting in cold winter seasons, Instead, heat the water first and add boiling water. 5. During assembly, check whether each cooling water hole is unobstructed. Regularly clean the cooling system with alkaline solution and promptly remove scale and oil stains. The cylinder is an important component of the diesel engine, and the wear of the cylinder should be minimized as much as possible to improve the performance and service life of the diesel engine)

Installation of the crankshaft in the cylinder block during engine assembly process

Before assembly, engine lubrication is necessary. After major repairs of engine parts, lubrication must be carried out before assembly. Within a few minutes before the engine starts running after reassembly, the system pressure has not yet increased and the oil circuit has not been filled with oil, so the lubrication provided by the lubrication system may be insufficient. Therefore, All parts must be lubricated with engine oil or approved engine refurbishment lubricant before installation. This can prevent engine wear before the lubrication system pressure is fully established. The installation of crankshaft bearings should first install the bearing shells. It is not recommended to lubricate the back of the bearing shells. Do not touch the bearing surface with your hands. Only lubricate the bearing surface in contact with the crankshaft journal. Each bearing liner has a locating protrusion, It should be correctly clamped in the positioning groove on the cylinder block. Install the crankshaft bearing and bearing cover and lubricate the bearing surface with oil or equivalent. Ensure that the oil passage hole in the bearing is aligned with the oil passage in the cylinder block. Place the crankshaft smoothly into the cylinder block, being careful not to touch it. Place the lower bearing shell into the main bearing cover. Ensure that the bearing liner is connected to the bearing cover, And the positioning protrusion is stuck in the positioning groove of the bearing cover. Lubricating the bearing liner. Install the bearing cover according to the direction of the arrow and the markings on the bearing cover. After installing the first bearing cover, rotate the crankshaft to ensure it is not stuck. Install the other bearing cover and tighten according to the specifications. Then rotate the crankshaft to ensure it is not stuck. Do this for each bearing cover. If the bearing cover is stuck, The problem may be on the bearing cover or bearing parts. Remove and inspect the bearing seat for burrs or improper assembly. If no problem is found, the cause may be crankshaft bending or cylinder deformation. When tightening the bearing bolts, alternate tightening the bolts or nuts to ensure that the bearings are properly seated and the bearing shells are properly pressed

BMW 6 Series introduce

The BMW 6 Series is a car specially designed by BMW Germany for sophisticated drivers. It was introduced in 1976 and discontinued in 1989. During this period, its sales reached 86000 units, making it the most successful box car in BMW's history After a 14 year hiatus, BMW decided to revive the 6 Series and once again enter this large luxury sports car market, showcasing the core concept of the BMW 6 Series in GT racing, combining the advantages of sports cars and luxury RVs The previous models of BMW's sporty two door cars have also perfectly achieved this integration. In terms of exterior design, the 6 Series maintains the typical dynamic style of BMW Coupe, with a long hood, low roof lines, and front and side skirts giving the car a dynamic and elegant posture. To distinguish it from other models, the headlights, engine cover, radiator grille, and front air vents have all been redesigned. By introducing new elements such as LED brake lights in the tail light design, in addition to greatly reducing reaction time, the size and brightness can be adjusted according to different environments. The BMW v8 engine provides power for the 6 Series. BMW is known for its advanced technological development, and a series of LED brake lights have been introduced. The application of high-tech projects has maintained BMW's leading position in the automotive industry. The 6 Series has also adopted many advanced scientific research achievements. The new 6 Series has a body length of 4820mm and a width of 1800mm, which is even wider than the 5 Series. Such a large body shape will inevitably increase the weight of the body, and excessive body weight will greatly affect the acceleration and handling of the 6 Series. Therefore, BMW has used a large amount of aluminum alloy and composite materials on the body of the 6 Series, In order to achieve the goal of reducing weight, carbon fiber reinforced plastic materials are 50% lighter than steel and 35% lighter than aluminum, which can effectively reduce the weight of the vehicle body. The rigidity is three times that of other materials in the central control area (10 sheets), and the collision resistance and safety are quite good, which has always been an ideal material for the automotive industry. However, due to the lack of stamping equipment, carbon fiber used to be produced manually. BMW has developed a set of stamping equipment with a self weight of 200 tons and a pressure of 1800 tons, which is the world's first mass-produced carbon fiber roof, and has begun trial use on the new 6 series. The 6 series also uses an overhead display (hud) system that is only available on aircraft, which can directly display some important information. Projected onto the windshield of the car, including navigation direction, speed, and active cruise control display. The core functions related to driving in the car are operated through the i-drive controller and buttons attached to the steering wheel, but the i-drive control button is placed on the right side of the gear lever and requires arm extension to reach. Other secondary functions and comfort equipment control are arranged in a distance that is easily accessible to the other (2) cars and front seat passengers, Very convenient. Users can also choose a panoramic glass roof that is much larger than a regular electric sunroof, allowing more sunlight to enter the luxurious interior of the car. Dynamic driving and active steering systems are optional equipment for the 6 Series, which can greatly eliminate the body roll caused by vehicle turning and increase the comfort of passengers inside the car. The active steering system, on the other hand, changes the steering ratio based on the vehicle speed through a stepper motor. At lower speeds, the steering sensitivity increases, and larger wheel turns can be achieved by turning the steering wheel at a smaller angle. This situation is very useful for drivers driving on urban roads or parking and turning around. As the speed increases, the steering becomes more sensitive. Accurate, ensuring driving stability and comfort. The BMW 6 Series engine is equipped with Dynamic Stability Control (DSC) and Dynamic Traction Control (DTC) systems. In addition, the Driving Dynamics Control (DDC) technology used in the BMW M3 and M5 models is also used in the new 6 Series, which is controlled through a "SPORT" button located on the center console The DDC function can increase the sensitivity of the throttle response, improve acceleration ability, and provide a more direct response to the power assisted steering mechanism, thereby increasing the driving pleasure of the driver. In terms of power, there is also the option to choose a sequential manual transmission (SMG), which can be changed by the paddles on the steering wheel or the gear lever. As for the interior, we have always trusted BMW. The 6 Series adheres to BMW's consistent style, perfectly combining luxury and practicality. The bright colors are more in line with its sporty characteristics, and there are multiple configurations to choose from. As a representative of luxury cars, the BMW 6 Series [2] also has many commendable features. In terms of sound configuration, the new BMW 6 Series is equipped with 8 features. A hi fi sound system with speakers, 9 space seats, and 6 CDs create a home theater effect