Engine computer wiring harness introduce

The most headache inducing issue in repairing high-end cars is the computer. When repair personnel encounter a computer malfunction, they dare not conclude that it is a problem with the computer. 1. The main function of the engine ECU is to adjust the engine's operation through the execution structure. In terms of use, it is a specialized microcomputer controller for cars, which controls many components on the car ECU stands for Electronic Control Unit ECU can be said to be the brain of the engine. Without it, the engine cannot operate normally. ECU's main function is to adjust the engine's operation through the execution structure. 2. There are many sensors near the engine of a car, and their function is to transmit data back to ECU. After processing by ECU, corresponding mechanisms can be executed to adjust the engine's normal operation. ECU is generally located in the engine compartment, so it can be said that there is no ECU, The engine cannot be used. If there is damage to the sensors near the engine, it can also affect the operation of the engine. 3. The sensors around the engine include the air influenza sensor, intake temperature sensor, etc. It can be said that basically all the sensors of the vehicle are gathered here. If the sensors are damaged, the ECU cannot collect important information about the car, and cannot accurately adjust the engine operation)

Internal maintenance of engine wiring harness

The engine wiring harness is generally composed of multiple strands of copper flexible wires inside and wrapped in plastic on the outside. The engine is like a person's heart, and the wiring harness can be called a person's veins. If the veins are not smooth, it can damage health and even cause diseases. Similarly, poor wiring will affect the engine's performance. Regular wiring harness maintenance: Wiring harness maintenance usually uses wiring harness protective agents, which work by forming a protective film on the surface of the engine wire/battery joint, Isolate moisture and avoid oxidation. Due to the high pressure resistance and insulation characteristics of the spray, it can also delay the aging and cracking of rubber and plastic fittings in the cabin, prevent electrical leakage caused by aging of the wiring harness. In addition, the protective film sprayed is not easy to get dirty and easy to wipe, which can keep the cabin clean for a long time

BMW 6 Series introduce

The BMW 6 Series is a car specially designed by BMW Germany for sophisticated drivers. It was introduced in 1976 and discontinued in 1989. During this period, its sales reached 86000 units, making it the most successful box car in BMW's history After a 14 year hiatus, BMW decided to revive the 6 Series and once again enter this large luxury sports car market, showcasing the core concept of the BMW 6 Series in GT racing, combining the advantages of sports cars and luxury RVs The previous models of BMW's sporty two door cars have also perfectly achieved this integration. In terms of exterior design, the 6 Series maintains the typical dynamic style of BMW Coupe, with a long hood, low roof lines, and front and side skirts giving the car a dynamic and elegant posture. To distinguish it from other models, the headlights, engine cover, radiator grille, and front air vents have all been redesigned. By introducing new elements such as LED brake lights in the tail light design, in addition to greatly reducing reaction time, the size and brightness can be adjusted according to different environments. The BMW v8 engine provides power for the 6 Series. BMW is known for its advanced technological development, and a series of LED brake lights have been introduced. The application of high-tech projects has maintained BMW's leading position in the automotive industry. The 6 Series has also adopted many advanced scientific research achievements. The new 6 Series has a body length of 4820mm and a width of 1800mm, which is even wider than the 5 Series. Such a large body shape will inevitably increase the weight of the body, and excessive body weight will greatly affect the acceleration and handling of the 6 Series. Therefore, BMW has used a large amount of aluminum alloy and composite materials on the body of the 6 Series, In order to achieve the goal of reducing weight, carbon fiber reinforced plastic materials are 50% lighter than steel and 35% lighter than aluminum, which can effectively reduce the weight of the vehicle body. The rigidity is three times that of other materials in the central control area (10 sheets), and the collision resistance and safety are quite good, which has always been an ideal material for the automotive industry. However, due to the lack of stamping equipment, carbon fiber used to be produced manually. BMW has developed a set of stamping equipment with a self weight of 200 tons and a pressure of 1800 tons, which is the world's first mass-produced carbon fiber roof, and has begun trial use on the new 6 series. The 6 series also uses an overhead display (hud) system that is only available on aircraft, which can directly display some important information. Projected onto the windshield of the car, including navigation direction, speed, and active cruise control display. The core functions related to driving in the car are operated through the i-drive controller and buttons attached to the steering wheel, but the i-drive control button is placed on the right side of the gear lever and requires arm extension to reach. Other secondary functions and comfort equipment control are arranged in a distance that is easily accessible to the other (2) cars and front seat passengers, Very convenient. Users can also choose a panoramic glass roof that is much larger than a regular electric sunroof, allowing more sunlight to enter the luxurious interior of the car. Dynamic driving and active steering systems are optional equipment for the 6 Series, which can greatly eliminate the body roll caused by vehicle turning and increase the comfort of passengers inside the car. The active steering system, on the other hand, changes the steering ratio based on the vehicle speed through a stepper motor. At lower speeds, the steering sensitivity increases, and larger wheel turns can be achieved by turning the steering wheel at a smaller angle. This situation is very useful for drivers driving on urban roads or parking and turning around. As the speed increases, the steering becomes more sensitive. Accurate, ensuring driving stability and comfort. The BMW 6 Series engine is equipped with Dynamic Stability Control (DSC) and Dynamic Traction Control (DTC) systems. In addition, the Driving Dynamics Control (DDC) technology used in the BMW M3 and M5 models is also used in the new 6 Series, which is controlled through a "SPORT" button located on the center console The DDC function can increase the sensitivity of the throttle response, improve acceleration ability, and provide a more direct response to the power assisted steering mechanism, thereby increasing the driving pleasure of the driver. In terms of power, there is also the option to choose a sequential manual transmission (SMG), which can be changed by the paddles on the steering wheel or the gear lever. As for the interior, we have always trusted BMW. The 6 Series adheres to BMW's consistent style, perfectly combining luxury and practicality. The bright colors are more in line with its sporty characteristics, and there are multiple configurations to choose from. As a representative of luxury cars, the BMW 6 Series [2] also has many commendable features. In terms of sound configuration, the new BMW 6 Series is equipped with 8 features. A hi fi sound system with speakers, 9 space seats, and 6 CDs create a home theater effect