Luggage compartment lid introduce

The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)

Installation and replacement process of luggage compartment lid/trunk lid

An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly

Brilliance BMW X1 introduce

The domestically produced Brilliance BMW X1 and the imported version X1 are almost identical. For BMW, there are no missing iconic details. The front face still features the standard dual kidney grille, coupled with the energetic triangular eyes, giving the entire front face a certain aura. The main difference between the domestically produced X1 xDrive20i and 28i on the front face is that they use a black grille while the 28i uses a chrome grille, The 28i has an additional horizontal chrome strip on the lower grille compared to the 20i. On the side of the Brilliance BMW X1, there is not much decoration, and a slightly upturned waistline gives its side a sense of power. The snowflake shaped five spoke aluminum alloy wheels add some fashionable elements to this sense of power, and the two are well integrated. On the C-pillar at the rear of the car, The classic corners of BMW are clearly visible, while the 28i has an additional silver skirt trim on the side compared to the 20i. At the rear, X1 continues to follow the rugged route of an SUV, but what reflects this ruggedness is the few simple lines. The large rear window occupies the majority of the rear. The sharp LED tail lights in the shape allow X1's body lines to continue here. The difference between the 20i and 28i at the rear is not significant, Mainly in terms of the silver trim on the rear bumper, the 28i is taller