Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Brilliance BMW X1 introduce

The domestically produced Brilliance BMW X1 and the imported version X1 are almost identical. For BMW, there are no missing iconic details. The front face still features the standard dual kidney grille, coupled with the energetic triangular eyes, giving the entire front face a certain aura. The main difference between the domestically produced X1 xDrive20i and 28i on the front face is that they use a black grille while the 28i uses a chrome grille, The 28i has an additional horizontal chrome strip on the lower grille compared to the 20i. On the side of the Brilliance BMW X1, there is not much decoration, and a slightly upturned waistline gives its side a sense of power. The snowflake shaped five spoke aluminum alloy wheels add some fashionable elements to this sense of power, and the two are well integrated. On the C-pillar at the rear of the car, The classic corners of BMW are clearly visible, while the 28i has an additional silver skirt trim on the side compared to the 20i. At the rear, X1 continues to follow the rugged route of an SUV, but what reflects this ruggedness is the few simple lines. The large rear window occupies the majority of the rear. The sharp LED tail lights in the shape allow X1's body lines to continue here. The difference between the 20i and 28i at the rear is not significant, Mainly in terms of the silver trim on the rear bumper, the 28i is taller